A timber frame modular house is a type of construction method that uses wooden beams or posts, known as timbers, to create the structural framework of a house. The modular aspect refers to the construction being done in sections or modules, which are then assembled onsite.
Modular construction further enhances the efficiency of the building process. The house is constructed in a factory setting, allowing for controlled conditions and precise measurements. This results in reduced waste, faster construction time, and potentially lower costs.
It’s important to note that building codes and regulations may vary depending on the location. Therefore, it’s advisable to consult local authorities and professionals familiar with the requirements for timber frame modular construction in your area.
Overall, a timber frame modular house combines the benefits of sustainable construction, energy efficiency, and design flexibility, making it a popular choice for many homeowners.

EXTERNAL WALL (422mm)

• Wooden planks (Siberian spruce 19mm (vertical cladding, primed, 2 times painted)
• Horizontal calibrated timber battens 45x28mm, c=600mm
• Vertical calibrated timber battens 45x28mm, c=600mm
• Diffusion membrane Tyvek soft
• Rigips GTS winf-proof board 9,5mm
• Calibrated timber studs 45x195mm (studs C24), c=600mm
• Mineral wool insulation Paroc Ultra, 200
• Vapour barrier /PE insulating film 200mk
• Calibrated timber 45x45mm (battens C24), c=600mm
• Mineral wool insulation Paroc Ultra, 42mm
• Rigips 12.5mm

EXTERNAL WALL without insulation (242mm)

• Wooden planks (Siberian spruce 19mm (vertical cladding, primed, 2 times painted)
• Horizontal calibrated timber battens 45x28mm, c=600mm
• Vertical calibrated timber battens 45x28mm, c=600mm
• Diffusion membrane Tyvek soft
• KTS knauf wind-proof board 9,5mm
• Calibrated timber studs 45x145mm (studs C24), c=600mm
• Mineral wool insulation Paroc Ultra, 200
• Rigips 12.5mm

PARTITION WALL (95mm)

• Rigips 12.5mm (Double gypsum board, 12.5 mm)
• Calibrated timber studs 45x95mm (studs C24), c=600mm
• Mineral wool insulation Paroc Ultra, 75mm
• Rigips 12.5mm (Double gypsum board, 12.5mm)

LOAD-BEARING WALL (145mm)

• Rigips 12.5mm (Double gypsum board, 12.5mm)
• Calibrated timber studs 45x145mm (studs C24), c=600mm
• Mineral wool insulation Paroc Ultra, 100mm
• OSB-3 SE board 10mm
• Rigips 12.5mm (Double gypsum board, 12.5mm)

FIRE WALL (270mm)

• Rigips 12.5mm (Double gypsum board, 12.5mm)
• Gyproc DuraLine 12.5mm
• Calibrated timber studs 45x145mm (studs C24), c=600mm
• Mineral wool insulation Paroc Ultra, 100mm
• Air gap 30mm
• Calibrated timber studs 45x95mm (studs C24), c=600mm
• Mineral wool insulation Paroc Ultra, 100mm
• Gyproc DuraLine 12.5mm
• Rigips 12.5mm

STRUCTURAL SLAB (380mm)

• Sponplate Extra (moisture resistant) 22mm
• I beams 90x300mm, c=600mm
• Gyproc DuraLine 12.5mm
• Mineral wool insulation Paroc Ultra, 200mm
• Calibrated timber studs 45x45mm (laths, C24), c=400mm
• Rigips 12.5mm

ROOF (Pitched roof)

• Roof cover
• Calibrated timber 45x45mm (battens), c=300mm
• Calibrated timber 45x45mm (cross battens), c=600mm
• Diffusion membrane TYVEK Pro
• 60/90×300/360, c=600mm
• Mineral wool insulation Paroc Ultra, 250mm
• Vapor barrier /PE insulating film 200mk
• Calibrated timber 45x45mm (laths, C24), c=400mm
• Mineral wool insulation Paroc Ultra, 42mm
• Rigips 12.5mm

ROOF (Flat roof)

• Hard wool insulation with slope Rockwool
• Vapor barrier/PE insulating film 200mk
• Forestia sponplate Extra (moisture resistant)
• Steico Joist 45/90×250/300mm, c=600mm
• Mineral insulation Paroc Ultra, 250mm
• Tyvek AirGuard Smart 1,5x50m
• Calibrated timber 45x45mm (laths, C24), c=400mm
• Rigips 12,5mm

PARAPETS

• Wood fibre insulation board STEICO Protect 60mm
• Calibrated timber 45x145mm (studs C24), c=600mm
• Diffusion membrane TYVEK Soft
• Vertical calibrated timber battens 45x45mm, c=600mm
• OSB -3 SE board 10mm

WINDOWS

• Wooden
• 3 glass
• Same color on both sides

DOORS

• Wooden

Residential homes;
Public buildings;
Commercial buildings;
Temporary housing solutions.